Aritech ATS4000 Servisní příručka Strana 13

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 83
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 12
ATS Designers Guide 13
1.2.1.2 ATS1110/11
LCD display 2x16 characters ATS1110
LCD display 4x16 characters ATS1111
16 area state diodes
3 system state diodes
Pry-off tamper alarm
Dimensions (LxHxD mm): 92x165x25.4
(closed cover)
The ATS1110/11 unit is one of the most basic RAS stations of the ATS system, providing,
through the LCD display, access to all system functions. The design of the unit enables
access to connector clamps and the DIP switches without opening the device housing.
The manipulator is attached to the surface via a metal plate. Assembling device on the
mounting bracket, using only one screw. This is a major simplification of the installation
process.
The DIP switch serves to set the device address and to set the bus termination. Other
settings (diode light settings, LCD backlight, output control etc.) are set via the control
panel programming menu.
1.2.1.3 ATS1115/16
LCD Display 2x16 characters ATS1115
LCD Display 4x16 characters ATS1116
16 area state diodes
3 system state diodes
Pry-off tamper alarm
Dimensions (LxHxD mm): 92x165x25,4
(closed cover)
This is an advanced product, containing an integrated ATS Smart Card reader. The
integration allows the device to use only one bus address instead of two. The access
control function ”Card and PIN” of the ATS1250 can be provided by one device.
The LCD display provides access to all system functions. The design of the unit enables
access to connector clamps and the DIP switches without removing the device switches.
The manipulator is attached to the surface via a metal plate. Assembling device on the
mounting bracket, using only one screw. This is a major simplification of the installation
process.
The DIP switch serves to set the device address and to set the bus termination. Other
settings (diode light settings, LCD backlight, output control etc.) are set via the control
panel programming menu.
1.2.1.4 ATS1155
3 system state diodes
1 area state diode*
Tamper switch input
Detached keyboard and electronics.
Dimensions (LxH, mm): 118x75
*- the red state diode serves to display the RAS station area state as well.
Zobrazit stránku 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 82 83

Komentáře k této Příručce

Žádné komentáře