Aritech ATS3000 Uživatelská příručka stáhnout pdf (Strana 39)

ATS2000/3000/4000/4500 Manager’s Guide

12. TEST ZONE

Use this function to test if an individual zone is operating correctly.

To test a zone

1. Access menu option 12.

The display shows:

2. Enter the zone number you want to test and press [ENTER], or

press [ENTER] to exit and return to the menu.

3. If you selected a zone, one of four responses is displayed:

• The zone is normal

e.g.

• The zone is active

e.g.

• There is a faulty condition due to cable tamper. The cabling to the zone

shows an OPEN circuit.

e.g.

• There is a faulty condition due to cable tamper. The cabling to the zone

shows a SHORT circuit.

e.g.

4. Press [ENTER] to exit and return to the menu option display.

 1. If a zone is active, open or short, the keypad emits a continuous tone. When

the status of the zone is changed to normal, the display is updated and the

tone stops.

2. If the zone is inhibited when a test is requested on it, the system uninhibits the

zone, conducts the test, and then returns the zone back to inhibited.

3. The test must be carried out within a pre-determined time. If the test is not

completed within this time, the option is exited.

Test Individual Zone:

Zone No:

NORMAL STATE on 12, Roller Doo

OPEN on 12, Roller Doo

SHORT on 12, Roller Door

CTIVE on 12, Roller Doo

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 70 71

Žádné komentáře

Aritech ATS3000 Uživatelská příručka Strana 39