Aritech ATS3000 Uživatelská příručka stáhnout pdf (Strana 17)

ATS2000/3000/4000/4500 Manager’s Guide

ACTIVE ZONES

(WHEN ARMING)

You cannot arm (or disarm, if your system is programmed that way) an area unless all the

zones in that area are normal, as an active zone would usually set off an alarm. For

example, all the doors and windows must be closed.

If a zone is active while you try to arm or disarm an area, the Advisor MASTER keypad

sounds seven quick beeps and displays the active zones.

Active zones are listed either:

One at a time

e.g.

As a list of numbers

e.g.

From either display:

Action Result

Press [NEXT] Update the list of active zones and display the next zones in the

list (if any).

Enter area number

and press

[ENTER].

Display the zone name in full.

Press [CLEAR] Exit the function and return to the display shown when you were

attempting to arm the system.

After you have determined which zones are active, you must check these and correct the

problem (e.g. close the door), then, exit this display, and try again to arm If you are

unable to close the zone, refer to Menu option 10, Inhibit Zone.

Žádné komentáře

Aritech ATS3000 Uživatelská příručka Strana 17